Benefits of HF technology
Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched.

The HF technology permits:

Compact wall-mounted designs to save floor space, significantly higher electrical performances.

Shorter recharge time, saving energy and a reduction of the batteries temperature during the cycle, also a strong reduction of the Co2 emissions and lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode and a customized charge curve on request. The three phase Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery.


Suitable for the cyclic recharge of lead — acid batteries and floating of sealed gel and / or lead — acid batteries.


Air pump available (optional extra)
Download data available trough PC/Laptop (optional extra)


All the three-phase BlackHawk battery chargers have full switching technologywith microcontroller digital control. They are flexible and reliable devices. The high efficiency of the battery chargers assures a remarkable energy saving optimizing the economic benefits and permitting to amortize the investment for the selection of high frequency in a short time.

They are suitable for the recharge of all kind of batteries (lead-acid gel, sealed, AGM batteries, etc…) and allow selecting a specific charge curve or configuring easily a suitable curve for the type of battery.
They are characterized by a negligible residual output ripple.

The battery chargers integrate the input and output protections and are equipped with an over-temperature.
They have a wholly programmable control unit, easy-to-use thanks to the user- friendly graphic interface displaying all the charge parameters, the alarms, the data plate and all general information concerning the device. These kind of battery chargers are equipped with a monochromatic graphic LCD display.


Technical Characteristics

Input Voltage: 400 Vca ± 15%, three-phase
Input Frequency: 50 – 60 Hz
Efficiency: ~ 90%
Operating Temperature: – 20 to + 50 °C
Current Drawn by the Battery: 0 A, if network electrically bonded
Protection against Output Short-circuit: Yes, fuse
Protection against Polarity Reversal: Yes, fuse
Thermal Protection Semi-conductors: Yes
Input Protection: Yes, fuses and varistors
Charge Curve: programming and settings at will — default IU IA
Displaying and Messages: monochromatic 4×20 LCD display
Audible Alarm Device: Yes
State Charge Indicator: Yes multicolours
Thermal Compensation: Yes, with optional probe
Auxiliary Contacts Optional: 2, configuration at will (mains presence, finished charge, control pump, etc…)
Ventilation: forced air circulation
Box: Metallic
Dimensions: 490 x 360 x 150 mm
Dimensions AIR: 503 x 490 x 153 mm
Weight: 20 kg — AIR 23 Kg
Protection: IP20
In conformity with the Low Voltage Directive 73/23/CEE and the EMC Directive 89/336/CEE and their successive amendments.